
On-Site Drapery Fabrication in Tampa Bay: How It Works
October 30, 2026
Multifamily Window Treatments: How to Specify Them
November 1, 2026The best window treatments for Florida sun are solar shades or sheer shades with a low openness factor on east- and west-facing glass, layered with drapery or a second shade where you want privacy and softness, and exterior shading where you can add it. The right choice depends on which way each window faces, what you want to keep (the view, the furniture, the cooling bill), and how you use the room after dark.
We fabricate custom window treatments in our Tampa Bay workroom, and the same question comes up in nearly every in-home consultation: how do I keep the sun out without living in a cave? This guide answers it room by room.
TL;DR
- Prioritize east- and west-facing windows first, then south, then north. Low-angle sun on east and west glass is the hardest to block.
- Solar shades filter glare and heat while keeping the view. A lower openness factor blocks more sun but lets you see out less.
- Cellular shades insulate, shutters give sturdy adjustable control, and drapery layers well over a shade for night privacy.
- Exterior shading beats anything inside the glass for heat, so pair interior treatments with screens, awnings or covered outdoor areas where possible.
- Custom fabrication and professional measuring matter in Florida, where windows are large and the sun is unforgiving.
What Florida sun actually does to a home
Florida sun creates three separate problems, and each one calls for a slightly different fix.
Heat. Florida’s long cooling season and short heating season make summer protection of windows, walls and sliding glass doors especially important, according to the Florida Solar Energy Center. The U.S. Department of Energy’s Building America field study of hot-humid climates found that radiant solar heat gain through windows has far more energy impact than conductive heat transfer, which raises cooling demand. In plain terms, the sun coming through your glass matters more than the heat leaking through it.
How much more? One Florida Solar Energy Center simulation of a Central Florida home attributed 19% of the air-conditioning load to solar radiation through windows. The same source cautions that homes with less shading or different orientations can carry a larger solar load. A west-facing great room with sliders and no overhang is exactly that kind of home.
Glare. The Florida Solar Energy Center notes that daylight becomes unwanted visual glare when it is not controlled. You know it as the afternoon glow that washes out the television, or the morning beam across the kitchen island.
Fading. Sunlight is hard on hardwood, rugs, upholstery and art. Every treatment that cuts light also cuts the exposure, though fabrics differ in how well they do it, which is why we talk about openness and fabric choice below.

Start with the direction each window faces
Before you pick a fabric, walk the house in the afternoon and note which windows take the sun. The U.S. Department of Energy’s Building America Solution Center guidance on shading and solar control says to prioritize east- and west-facing windows, then south-facing, then north-facing last. It also recommends combining shading methods and including an operable option for each window.
The timing in Florida is specific. The Florida Solar Energy Center reports that significant solar heat gain occurs between 6:30 a.m. and 10:00 a.m. on east walls and between 2:00 p.m. and 5:30 p.m. on west walls. The same publication says good shading strategies can produce 10% to 20% cooling and heating energy savings, and that low-angle morning and afternoon sun is difficult to block with roof overhangs alone.
A practical way to apply this:
| Window direction | When the sun hits | What usually works |
|---|---|---|
| East | Early morning | Solar or sheer shades, light-filtering roller shades, or shutters you can angle |
| South | Midday, strongest in summer | Solar shades with a low openness factor, plus overhangs or exterior screening |
| West | Mid-afternoon to evening | The most protective option: dense solar shades, dual shades, or shutters |
| North | Soft, indirect light | Whatever suits your design: drapery, Roman shades, sheers |
If your west windows are the problem, we cover that one in depth in our guide to controlling west-facing window glare in Tampa Bay.
Solar shades: the workhorse for heat and glare
Solar shades are woven screen fabrics that filter sunlight instead of blocking it completely. They are the first thing we suggest for large, view-heavy windows because they cut glare and heat while you can still see the yard, canal or pool.

The key spec is the openness factor: the percentage of open weave in the fabric. A 1% fabric is tightly woven and blocks the most light and heat. A 10% fabric lets in more light and gives a clearer view out. For south- and west-facing glass in Florida, we typically steer homeowners toward the 1% to 3% range, and our page on UV-blocking shades and zoning by room explains how we split a house into zones.
Two trade-offs are worth knowing before you order:
- Color changes the view. Phifer, a screen fabric manufacturer, explains that darker colors generally improve outward daytime visibility, while lighter colors reflect more. Darker fabrics, though, may give less privacy at night.
- Night reverses the view. When lights are on inside and it is dark outside, people outdoors can see in. Blackout fabric is the fully opaque option for nighttime privacy.
On heat performance, screen fabrics are engineered for the job: Phifer says its sun protection screening is designed to absorb and dissipate 80 to 95 percent of the sun’s heat and glare before it reaches the glass. That figure describes exterior screening, which brings us to the next point.
Why exterior shading beats interior shading, and what to do about it
The physics is simple. Heat stopped outside the glass stays outside. The Department of Energy’s guidance on window attachments for solar control says exterior devices, such as roller shutters or solar screens, are typically more effective than interior treatments because they block heat before it reaches the window. The Florida Solar Energy Center makes the same point: it is better to block sunlight before it reaches the window.
That does not make interior treatments pointless. Most homeowners cannot add exterior shading to every window, homeowners associations may restrict it, and interior treatments control privacy, light level and style in ways exterior screens do not. The sensible approach is to treat the two as a system:
- Use exterior screens, awnings or covered lanai space on the worst exposures where permitted.
- Use interior solar, cellular or sheer shades to handle what gets through.
- Add drapery for softness, acoustics and nighttime privacy.
We also fabricate outdoor drapery and shades for covered patios and lanais, which gives you shade at the point where sun first meets the house. If you are planning the outdoor side as well, this overview of deck shade solutions is a good companion for thinking about seasonal performance and practical needs outside the glass.
How the main treatments compare
The Building America Solution Center summarizes the differences well: solar shades filter light while keeping views, cellular shades insulate with air pockets, and shutters give sturdy, adjustable light and privacy control. Drapery and dual-layer treatments let you layer materials and adjust through the day. Here is how that plays out in a Florida home.
| Treatment | Light and glare | Privacy | Insulation | Best Florida use |
|---|---|---|---|---|
| Solar roller shades | Excellent glare control, view preserved | Moderate by day, low at night | Moderate | Big windows, sliders, west and south glass |
| Sheer shades | Soft, diffused light | Moderate | Low to moderate | Living areas where you want softness and a view |
| Cellular shades | Good, from filtering to blackout | Good | Highest of the group | Bedrooms, offices, rooms you cool heavily |
| Shutters | Adjustable louvers | Excellent | Moderate | Street-facing windows, formal rooms, impact-minded homes |
| Drapery | Depends on lining and fabric | Excellent when closed | Moderate with lining | Layering over shades, bedrooms, dining rooms |
| Dual shades (solar plus blackout or light-filtering) | Full range through the day | Excellent | Moderate to good | Sunrooms, media rooms, west-facing great rooms |
The cells in that table reflect how the products behave in our experience rather than lab ratings. For rated performance, the same federal guide recommends comparing products using AERC ratings, which are the standard way to compare window attachments on energy performance.
Sheer shades
If you find solar screen fabric too technical-looking, sheer shades offer a softer alternative with a fabric-like feel and an openness in the low single digits. We walk through the details in our guide to sheer shades for homeowners.
Cellular shades
Cellular (honeycomb) shades trap air in their pockets, which is why they make sense in rooms where you want to hold the cool in. They are less about the view and more about comfort, so we favor them in bedrooms and home offices. For a full look at what pays off on the energy side, see our rundown of the best blinds for energy efficiency and our guide to window shades for heat reduction.
Shutters and impact-rated options
Shutters give you louvers to angle the light rather than block it entirely, and they are a durable choice for rooms you use daily. In Florida, wind matters too. The Department of Energy notes that some impact-resistant shading devices, such as Bahama shutters, are designed to protect against flying debris during hurricanes or tornadoes. If storm protection is part of your decision, read our guides to hurricane-proof window shutters in Tampa Bay and impact window treatments.
Drapery and layering
Drapery is the part of a Florida window treatment that most often gets dropped from the plan, and it shouldn’t be. A solar shade handles the sun. Drapery handles everything else: the sliders at night, the echo in a tile-floored room, the line where a tall window needs to look finished. Fullness matters here. Too little fabric looks like a sheet hung on a rod; we typically build drapery with enough fullness to stack neatly and fall in soft folds. If you are deciding between light-filtering and blackout fabrics for a layer, our light filtering vs. blackout shades guide lays out the choice.
Room-by-room guidance
Living rooms and great rooms
These usually have the largest glass and the most furniture to protect. A solar shade with a low openness on the sun side, plus drapery panels on a decorative rod, covers glare, heat and evening privacy. On sliding doors, a solar shade that glides with the door gives you view and sun control in one move. We explain the options in our piece on solar shades for sliding glass doors.
Bedrooms
Bedrooms with east exposure get hit early. Cellular blackout shades or lined drapery over a light-filtering shade will give you darkness at 7 a.m. in July and keep the room cooler during the day.
Kitchens and breakfast nooks
Keep it simple and washable. Roller shades or Roman shades in performance fabrics hold up near sinks and cooktops, and you can lower them just enough to cut the low-angle glare without losing the light entirely.
Sunrooms, lanais and Florida rooms
Glass on three sides means heat and glare from every angle, so you need controls that adapt through the day. Dual shades (a solar fabric paired with a blackout or light-filtering layer) suit these rooms, and motorization makes tall or hard-to-reach shades practical. We build motorized blinds and shades that can run on schedules, so the shades come down before the sun arrives.
Art walls and display cabinets
If you collect art, direct sun is the enemy of paper, pigment and frames. Our guide to protecting artwork from Tampa sunlight covers UV-protecting options in detail.
Commercial spaces
Offices, restaurants and retail storefronts face the same sun, with the added problem of screen glare and customer comfort. The Florida cooling season is long enough that shading is an operating cost decision as much as a design one. We fabricate for commercial window treatments as well, including motorized systems for large runs of glass.
What to check before you buy
The federal guidance lists a useful set of criteria: performance in summer and winter, maintenance, convenience, control and automation, resistance to high winds, view, airflow, daylight, privacy, cost and aesthetics. Compare AERC ratings when you are weighing products on energy performance. A short checklist from our experience:
- Orientation first. Rank your windows by sun exposure, and spend most of your budget on the worst ones.
- Operable controls. Pick a treatment you can raise and lower, since the sun’s angle changes by season.
- Measure precisely. A shade that is a quarter inch off lets light leak at the sides and rubs the frame. Inside versus outside mount changes the result.
- Fabric choice. Ask for the openness factor and the fabric’s UV and heat performance in writing.
- Cleaning and service life. Humidity and strong light shorten the life of cheap fabrics. Ask what the manufacturer warrants.
- Compromise on purpose. The Florida Solar Energy Center observes that one window design for all seasons is not a practical expectation, and that the best design balances competing features. That is the argument for layered treatments.
What each of these costs depends on size, fabric, mount and motorization, so we price after measuring. Our page on window treatment cost factors explains what moves the number.
Our perspective: treat windows as architecture
We think of custom window treatments as architecture with fabric instead of drywall. They shape how a room feels from morning to night, and in Florida they also do real work, managing heat, glare and fading that a plain pane of glass cannot.
After more than 30 years in Tampa Bay, the mistake we see most is buying treatments room by room, without looking at the whole house. A west-facing family room gets a nice decorative drape with no solar control, then the owners add a second layer a year later. We would rather map the sun first, then choose fabrics. Because we fabricate everything in our own workroom, we can adjust fullness, lining, openness and hardware to fit the windows you actually have, rather than adapting your windows to a stock size.
There is also an honest limit: interior treatments will never match exterior shading on pure heat rejection. We tell clients that up front, and then design the interior layer to do everything it can.
— The Drapery Company
Get a plan for your windows
If you would like help mapping sun exposure, choosing fabrics and openness, and coordinating shades with drapery, we offer in-home consultations with professional measurement and installation. We also remove your old treatments as a courtesy. You can see our full range of shades, blinds and shutters, or start from the Drapery Company home page to request a quote.
FAQ
What is the best window treatment for Florida afternoon sun?
For west-facing glass, dense solar shades (1% to 3% openness), dual shades or shutters are the most effective interior options. The heaviest solar gain on Florida west walls arrives roughly between 2:00 and 5:30 p.m. If you want a softer look, add lined drapery over the shade.
Will solar shades block my view?
Not entirely. Solar shades are designed to keep an outward view during the day while cutting glare and heat. Lower openness factors block more sun but reduce clarity, and darker colors typically give a better outward view than lighter ones. At night with lights on, people outside may see in, so add a blackout layer or drapery if privacy matters.
Are interior window treatments enough to cool a Florida home?
They help, but exterior shading is generally more effective because it stops heat before it reaches the glass. Interior treatments are still worthwhile, since they control glare, fading and privacy, and they cover windows where exterior shading is impractical. The best results come from combining both.
Can window treatments protect furniture and floors from fading?
They reduce exposure, and low-openness solar shades and UV-protecting fabrics do the most. No treatment makes fading impossible, and the effect also depends on whether the shades are kept down during peak sun. For valuable art or antiques, we recommend a dedicated plan.
Do you install and remove old treatments?
Yes. We handle measuring, fabrication in our Tampa Bay workroom, professional installation, and removal of your old window treatments as a courtesy.
Sources
- Residential Walls and Windows, Florida Solar Energy Center
- Energy Retrofit Field Study and Best Practices, Hot-Humid Climate, U.S. Department of Energy
- Humidity in Florida Homes, Florida Solar Energy Center
- Concepts in Passive Design #2, Florida Solar Energy Center
- Shading and Solar Control for Windows and Skylights, Building America Solution Center
- Window Attachments for Solar Control and Energy Efficiency, Building America Solution Center
- Window Treatments and Privacy, Phifer
- Sun Protection Screening, Phifer
- Industry Guide to Selecting the Right Window, Florida Solar Energy Center
- Potential of Energy Efficiency and Solar, Florida Solar Energy Center


